Équipement d'entraînement automobile à énergie nouvelle Fabricant From China de page 3

Plateforme de formation sur les systèmes automatiques de climatisation automobile

Features of the BYD Pure Electric Vehicle Training System (Automotive Air Conditioner Training System) Structure & Principle Training Based on the original BYD pure electric vehicle air conditioning system and PTC electric heating system , this car air conditioning training system provides an intuitive demonstration of the structural components and working principles of new energy automotive HVAC systems (cooling & heating). Supports high-voltage system familiarization, HV

Appareil pédagogique de démonstration du système de climatisation automobile

BYD New Energy Automotive Air Conditioning Training System 1. System Overview The BYD Pure Electric Vehicle Air Conditioning Training System is a professional new energy automotive training equipment designed for hands-on learning of EV HVAC systems. It features modular construction , OEM wiring integration , and an intelligent fault simulation system , providing comprehensive training on high-voltage and low-voltage circuits, diagnostics, and troubleshooting. 2. Technical

Plateforme d'équipement éducatif de formation au système de contrôle du moteur des véhicules électriques

1. Product Overview The EV Motor Control System Training Educational Equipment is designed to provide hands-on learning of core electric vehicle (EV) propulsion technologies. This new energy automotive training equipment enables users to study the performance characteristics, structure, and fundamental principles of AC motor control systems in pure electric vehicles. Through interactive demonstrations and circuit analysis, trainees can master the working principles of motor

Équipement de formation personnalisable pour le contrôle électrique haute tension automobile

Technical Specifications of New Energy Training Bench 1. Hardware Configuration Module Specifications Main Controller NXP SPC5744 (Automotive-grade) Power Drivers 7 high-side / 8 low-side / 12 PWM / 4 stepper motor groups Signal Acquisition 12 digital Hall inputs / 14 isolated ADC channels Communication 3x CAN / 1x LIN Mechanical Design Aluminum-steel hybrid frame / Waterproof & shockproof enclosure / Modular PCB 2. Software & Training Features Function Supported Features

Supports de formation pour le système de charge AC/CC des véhicules électriques

Electric Vehicle Charging Pile Teaching System 1. Product Overview This Electric Vehicle Charging Pile Teaching System is based on real AC/DC charging infrastructure, featuring a modular design with a mobile frame and an instructional panel. The system accurately replicates the operational principles of actual charging piles, making it ideal for vocational schools and training institutions. It serves as essential new energy automotive training equipment , supporting in-depth

Équipement de formation au système de charge AC/DC pour véhicules à énergie nouvelle

EV Charging System Training Platform Product Overview This advanced new energy automotive training equipment provides a complete hands-on solution for understanding electric vehicle charging technology. The system features a fully functional AC/DC charging station with integrated management capabilities, allowing students to practice real-world charging operations, system monitoring, and fault diagnosis. Designed for vocational schools and technical training centers, the

Équipement pédagogique du système de charge AC/DC pour véhicules à énergie nouvelle

Interactive EV Charging & Diagnostic Trainer 1. Real-World Charging Simulation The system replicates commercial EV charging stations with: Authentic Operation : AC/DC charging via RFID card, mirrored on a live-data display for process visualization. Remote Management : Embedded console enables monitoring of critical parameters (voltage, current, faults) akin to industrial Vehicle Charging System Modules . Structural Transparency : Exposed components reveal charging pile

Plateforme pédagogique de gestion BMS et de recharge CA/CC

1.Product requirements The power battery pack testing training platform is based on new energy vehicle components and can perform core component testing of power management systems, single battery capacity sorting, battery module assembly, system testing, functional verification, etc. Satisfy the daily teaching and training needs for cognitive detection and diagnosis of new energy vehicle power management systems. 2. Product compositionThe system consists of a lithium iron

Système de gestion de la batterie des voitures à énergie nouvelle

Advanced New Energy Vehicle Power Battery Training System 1. Product Overview This new energy automotive training equipment features a pure electric vehicle training system with automotive-grade LiFePO4 power batteries (3.2V, 20Ah per cell). The 24-cell series battery pack delivers a 76.8V nominal voltage , managed by an advanced Battery Management System (BMS) . The system includes a 10-inch touchscreen display for real-time monitoring of battery voltage, charge/discharge

Simulateur de formation à l'assemblage de batteries de puissance automobile

Comprehensive Training System for EV Drive Assembly & Diagnostics 1. Product functional features1.1 12V power supply, 1 car charger power supply, and 1 ignition switch. 2. Battery system charging management, supporting national standard slow charging MODE2 mode and national standard fast charging MODE4 mode. 3. Battery system discharge management, CAN communication protocol. 4. Real time system voltage and current acquisition. 5. Single cell voltage and temperature collection

Aides à la plateforme d'évaluation de la commande électrique à haute tension des véhicules électriques

Structure & Technical Specifications of the New Energy Test Bench 1. Realistic Vehicle Simulation & User-Friendly Control Panel The test bench is constructed using real automotive components and an aluminum-steel hybrid frame to simulate an actual vehicle body. The control panel is designed for technical teaching equipment , integrating switches, knobs, and indicators to simulate various driving conditions, enhancing hands-on learning and testing flexibility. 2. High

Équipement d'entraînement de contrôle électrique à haute tension de nouvelle énergie

New Energy Vehicle Control Assessment System Test Bench 1. Core Electric Control System Architecture This new energy automotive training equipment adopts an automotive-grade SPC5744 MCU processor with: 10 high-side switches | 12 PWM drives | 7 high-side power drivers | 8 low-side drivers 12 Hall-effect digital inputs | 14 isolated ADC analog inputs | 7 low-control switches 4 sets of 5-wire stepper motor drivers | 3 CAN channels | 1 LIN channel Modular 4-layer PCB design

Équipement de formation au système de gestion de la batterie des véhicules électriques

New Energy Vehicle Power Battery Teaching & Training System 1. Product Overview This product adopts mass-produced lithium iron phosphate (LiFePO4) power batteries for new energy automotive training equipment , with a nominal voltage of 3.2V per cell and a capacity of 20Ah, ensuring high safety and stability. The battery pack consists of 24 cells in series , delivering a rated voltage of 73.6V, and is equipped with an advanced Battery Management System (BMS) . It enables real

Plateforme de formation sur le nouveau système de gestion des batteries à entraînement énergétique

Intelligent EV Power Battery & Charging Training Platform 1. System Highlights This pure electric vehicle training system integrates LiFePO4 power batteries (76.8V, 24S) with a smart BMS and 10-inch touchscreen , enabling real-time monitoring of: Battery voltage, current, SOC, temperature Relay status, CC/CP signals, insulation resistance Single-cell voltages & passive balancing (100mA) The OBC supports CAN communication , automatically initiating constant-current charging

Équipement de moule de dissection automatique de nouvelle énergie par COROLLA

New Energy Auto Dissection Mould Equipment Product Overview This new energy auto dissection mold equipment is an anatomical display platform designed specifically for teaching new energy vehicle power systems. It uses an original hybrid powertrain (including engine, generator, and electric motor) for three-dimensional dissection, and clearly displays the internal structure through multi-color layered spraying technology. Core Features Dynamic demonstration function: equipped

Nouveau dispositif de dissection de voitures à énergie de COROLLA

New Energy Car Dissection Pattern Equipment 1. 3D Anatomical Display System – Multi-Color Layered Powertrain Visualization The New Energy Car Dissection Pattern Equipment features an OEM hybrid powertrain assembly (including engine, generator, and motor) with precision-dissected structures, fully showcasing the internal and external components of a hybrid electric vehicle (HEV) system. Critical cross-sections are treated with multi-color layered painting for enhanced

Nouveau modèle d'équipement anatomique de voiture à énergie par COROLLA

New Energy Car Anatomical Model Equipment Product Introduction New energy car anatomical Model equipment adopts a refurbished hybrid power system (including engine, generator, and electric motor, etc.) assembly for profile processing. All components are complete and the profile position is reasonable, which can comprehensively display the internal and external structure and component movement of the hybrid power system. The MCU control system can simulate the operating status

Équipement d'entraînement pour le système de détection de l'anatomie automatique de la nouvelle énergie

System Introduction The Auto Anatomy Detection System Training Equipment is a cutting-edge educational platform based on the BYD E5 EV platform. This complete training solution features real-time diagnostic capabilities for all major EV systems while maintaining full vehicle functionality, making it superior to traditional training methods. Key Technical Features Preserved high-voltage system with strategic body panel dissection Complete circuit access points with schematic

Équipement d'entraînement du système de test d'anatomie automobile à énergie nouvelle

Product Overview This New Energy Automotive Anatomy Test System Training Equipment is developed based on the BYD E5 pure electric vehicle, incorporating a real-time diagnostic interface for monitoring sensors and actuators across all critical systems. Designed for technical education, it provides an immersive learning platform that replicates real-world EV environments while optimizing instructional efficiency. Functional Features 1.High-Voltage System Visualization & Intact

Système de détection de l'anatomie des véhicules à énergie nouvelle Équipement éducatif

Product Introduction: This vehicle anatomy detection system education equipment is based on BYD E5 pure electric vehicle. It is equipped with six detection boards, which can detect the working status of sensors and actuators of each system in real time. This product can intuitively understand the system composition of pure electric vehicles, is closer to the real car environment, and is easier to teach than the real car. Functional characteristics: 1. Based on the whole pure

Véhicule purement électrique Formation professionnelle Équipement pédagogique

This Drive System Training Platform is designed for Vehicle Vocational Training , providing a comprehensive, hands-on learning experience for electric vehicle (EV) drive systems. Based on real-world EV powertrain technology, it accurately demonstrates the structure, operation, and diagnostic procedures of modern electric drivetrains. Key Features Real Operational EV Components – Fully functional pure electric drive system for practical training Interactive Learning – Real

1 2 3 4 Suivant

Entraîneur de moteur automobile

Formateur de moteur diesel

Formateur électrique automobile